As we all know, when designing membrane structure, we must pay attention to the complete combination of structure and architecture, form-finding to ensure the static balance of the system, stress analysis of nonlinearity and large displacement, and the reciprocal hyperboloids of membrane structure form-finding, which are suitable for wind and snow loads in different areas. So what are the precautions when designing membrane structures? The following is a brief introduction by Texmond membrane structure manufacturer:
1. Translucency
Translucency is a significant feature of membrane structure. Compared with other materials, it has significant advantages in both beauty and operation. It scatters light, eliminates glare, and can diffuse light widely into its internal space. The internal coating of the material has a high reflectivity, which can maintain the indoor lighting effect at night. The surface glows under backlight at night, which is natural lighting and saves energy.
2. Energy saving
The membrane structure has a beautiful appearance and creates a natural light environment for people. Compared with glass materials, it greatly reduces the transfer of heat. Compared with opaque materials, it reduces the electricity consumption of indoor lighting. The impact of membrane structure on energy issues: in tropical areas, it reduces the electricity consumption of air conditioning and refrigeration, and in cold areas, it increases the electricity consumption of indoor heating equipment.
3. Acoustic effect
Architectural acoustics is mainly A. Exclude external noise B. Absorb indoor echo The membrane material of the membrane structures can allow indoor 0-60HZ low-frequency noise to pass through. For larger areas and higher special requirements, special inner membrane materials can be used to absorb noise. Of course, the membrane material has limited ability to reduce and isolate external noise. Therefore, when the external noise insulation requirements are high, the membrane material may not be suitable.
4. Fire prevention
The membrane material fully meets the requirements of fire prevention regulations. Therefore, under the condition that the height and clearance are allowed, the membrane structure is suitable for any kind of building. Generally, the automatic fire-fighting system is suitable for the membrane material. The fire prevention design should be considered from the overall perspective.
Texmond Membrane Structure has gathered and trained a large number of early research and development teams and skilled technical personnel engaged in membrane structure, with a large number of high-level, high-quality designers and technical teams, the company has many membrane structure project managers, professional high-end talents are always ready to escort your project.